What we fix · Winchester, MA
Cooktop Repair
Induction, gas and electric Wolf cooktops sit in tight stone cutouts where heat and moisture both collect. We diagnose power and coil boards on induction, spark modules, valves and orifices on gas, and switches and elements on electric, and we check the cabinet ventilation that caused the fault in the first place.
In the caller's words
How it gets described
- Induction surface reporting a fault whenever two zones run together
- An electric zone stuck on full heat regardless of the setting
- Gas igniters clicking away continuously in damp weather
- One burner running tall and yellow after a deep clean
On the visit
What gets measured
| Inverter temperature | On induction, under a full pan and a two-zone load |
|---|---|
| Cooling airflow | At the cabinet vent — the usual cause of a drop-out |
| Spark electrodes | Gap and porcelain condition on every gas burner |
| Valve and orifice | On a burner running tall or yellow after a clean |
| Touch control | Response and relay behaviour on electric zones |
Order of work
Three steps, same as every call
-
Step one
The plate, then the symptom
Model and serial off the rating plate — behind the oven door on a range, under the front lip on a cooktop — and a plain description of what it is doing. Most calls narrow to two or three candidates before the van moves.
-
Step two
Numbers, taken in the kitchen
Manifold pressure, igniter draw, element and sensor resistance, true cavity temperature against the set point, blower current at each speed. A reading either agrees with the symptom or it does not, and that is the whole diagnosis.
-
Step three
One price, then the work
Parts and labour quoted as a single number and agreed before anything is dismantled. Where the honest answer is that the repair is not worth doing, that is what you get told.
What it costs
One fixed figure, and a published range for the rest
$95
Flat service call
Covers the visit and the full diagnosis. Approve the repair and it comes off the bill in full; decline it and that is all you have paid.
| Completed repair | Parts and labour |
|---|---|
| Igniter or spark module replacement | $260 – $620 |
| Burner valve or orifice service | $260 – $1,000 |
| Oven thermostat or sensor calibration | $150 – $680 |
| Convection fan or motor | $320 – $900 |
| Control board or touch panel | $530 – $1,580 |
| Door hinge, glass or seal | $200 – $930 |
Which band your call lands in is settled by the diagnosis on the visit, never on the phone. For comparison, a comparable replacement appliance is $6,850 to $19,240 before delivery, fitting, gas or electrical work — which is why most of these repairs are still the cheaper answer.
Reviews
On cooktop repair
5out of 51658 reviews
Igniters clicked away nonstop whenever the damp came off the lakes, day and night. Moisture was tracking across the spark module terminals. He dried and sealed the area properly, fitted a new module, and it stayed silent right through a very wet fortnight.
Franklin V.Mystic Lakes
An electric zone was stuck on full heat no matter where I turned the knob. The switch contacts had welded closed. New switch, and he checked the other three for the same wear before he left.
Rowena B.Winchester Highlands
Stone cutout with no air gap at all, which he said was the real cause. A zone kept cutting out under load. He fitted a new power board and cut a proper vent through the cabinet back.
Alistair M.Wedgemere
Also on the van
The rest of the cooking suite
Book it in
Cooktop Repair in Winchester, starting with the rating plate.
(781) 410-4833Answered 24/7 · vans out 8:00 am – 8:00 pm, seven days · flat $95 service call, credited against an approved repair